What our inverter installation includes
Our inverter installation service covers the physical mounting of the unit, the electrical connection to the solar array, battery bank where fitted, and the essential changeover and protection components that keep the system operating safely. We work on homes, townhouse units, small offices, workshops and similar properties in Pretoria, Centurion, Johannesburg, Midrand, Durban, Cape Town and Bloemfontein.
Every installation starts with a check of the existing supply, load profile and space available for the equipment. We confirm the inverter size, the cable route, ventilation needs and the point where the unit will sit on a wall or service area. In Pretoria and Gauteng, heat and dust can affect equipment placement, while coastal humidity in Durban and Cape Town means enclosure and mounting choices matter as well.
- Wall mounting on a suitable internal or sheltered external surface
- Connection to solar panels, batteries and the main distribution board
- Installation of changeover equipment and protection devices
- System labelling, testing and commissioning
- Electrical work completed by qualified installers
System specifications we work with
We install inverter systems sized to match the property and the load it must carry. For a small home, that may mean a compact single-phase unit for essential circuits. For a larger house or a small business, a higher-capacity unit with more input channels, stronger charging ability and battery support may be needed. We do not force a one-size-fits-all setup because that often leads to nuisance tripping or poor battery use.
Typical specifications are discussed during the site assessment, including rated output, surge handling, input voltage range, maximum solar input, battery voltage compatibility and the number of circuits to be backed up. If the property has pumps, fridge/freezer loads, office computers or gate motors, we plan for start-up surges and not just the running load. That part is important, otherwise the system can feel underpowered even when the numbers look fine on paper.
- Single-phase and three-phase options, depending on the supply
- Battery compatible systems for backup during load-shedding
- PV input matched to the size and layout of the panel array
- Monitoring setup where supported by the equipment
- Mounting clearances planned for airflow and maintenance access
Our installation process from first visit to handover
The process is straightforward and practical. First we assess the site and confirm the best location for the inverter, batteries if included, and related protection gear. Then we prepare a design and installation plan, covering cable routes, isolators, earthing, mounting height and the circuits to be supplied.
Once the work starts, our team mounts the inverter, completes the wiring, checks polarity and confirms that the unit communicates correctly with the rest of the system. We then test the changeover behaviour, charging settings and output performance under normal conditions. For many homes and small businesses, this can be done within a day, although larger or more complex sites may need a bit longer.
- Site assessment and load check
- System design and equipment selection
- Mounting, wiring and protection setup
- Commissioning, testing and user handover
- Explaining basic operation and fault indicators
Pricing approach and what affects the cost
Our pricing is based on the actual job requirements rather than a fixed generic rate. The cost depends on inverter size, cable lengths, mounting conditions, whether batteries are included, the condition of the existing electrical board and how much integration is needed with the solar panels and backup circuits. A simple replacement or addition is usually quicker than a full new installation on a property with older wiring.
We provide pricing after a site assessment or detailed request through the enquiry form on our contact page. That lets us quote properly for the right equipment and labour, without guessing. It also avoids hidden extras later on. If a property needs extra protection devices, longer cable runs or a tidier relocation of the unit to a safer wall, that will be discussed up front.
- Equipment size and type
- Distance between panels, batteries and distribution board
- Condition of existing wiring and board layout
- Site access and mounting surface requirements
- Scope of commissioning and user training
Turnaround times for homes and small businesses
Most standard inverter installations are scheduled after the assessment and product confirmation stage. If the system is uncomplicated and the equipment is on hand, turnaround can be fairly quick. More detailed jobs, or those involving multiple circuits, commercial loads or older electrical infrastructure, may need extra planning before installation day.
We work across Pretoria, Centurion, Johannesburg, Midrand, Durban, Cape Town and Bloemfontein, so timing also depends on route planning and access to the property. In peak periods, especially when load-shedding worsens, lead times can stretch a little. We always aim to keep the schedule clear and realistic rather than promising a rushed install that creates trouble later.
- Standard residential jobs: often completed in a day
- More complex small business sites: may need additional time
- Weather, access and board upgrades can affect the schedule
- Commissioning is never skipped, because that is where mistakes show up
Maintenance intervals and aftercare support
An inverter does not need constant attention, but it does benefit from regular checks. We recommend a routine inspection at least once a year, and sooner if the property has heavy daily use, dust exposure, coastal air or frequent power interruptions. During maintenance we check wiring tightness, airflow, warning logs, output performance and visible signs of heat or wear.
Panel cleaning, battery care and cable inspection all play a part in keeping the inverter happy. If a unit trips often, starts showing error codes or seems to charge poorly, it should be checked early rather than left until the next outage. Small issues can become larger and more expensive if ignored, especially when a system is being used every day.
- Annual service for most homes
- Six-monthly checks for heavier-use systems or coastal properties
- Fault finding for tripping, poor charging or warning alerts
- Support callouts available for installed systems
Inverter Installations for South African Homes and Businesses
Linuo Solar is based in Centurion, Pretoria and works with South African homes and small businesses. Our managing director, Vuyo Phasha, leads a team that includes Naledi Kgosi in operations, Sarel Delport on site as senior installer, Palesa Mabena on project coordination, Mothusi Mphahlele handling technical support, Faatimah Latief in customer care and Unathi Tau focusing on solar water heating. That mix helps us manage projects properly from the first enquiry to final handover.
Clients contact us through the enquiry form on our contact page, and we take the time to match the inverter installation to the property rather than pushing an oversized or undersized setup. Whether the job is in Pretoria, Gauteng or further afield, we keep the work practical, neat and compliant with the electrical requirements of the site.
- Local installation knowledge for South African conditions
- Qualified electrical integration on every job
- Clear advice on sizing, placement and upkeep
- Support for homes, offices and small business premises
Key facts
| Service type | Wall mounting, connection and setup of inverters within a complete solar installation |
|---|---|
| Property types | Homes, townhouses, offices, shops and small business premises |
| Supply areas | Pretoria, Centurion, Johannesburg, Midrand, Durban, Cape Town and Bloemfontein |
| Typical system range | Single-phase and three-phase inverter options, sized to the load |
| Installation team | Qualified installers handling electrical integration and commissioning |
| Maintenance interval | Annual inspection recommended, with more frequent checks for heavy use or coastal properties |
